TRUMBULL INDUSTRIES, INC.
RITE-HITE ADAPTERS
Slide-type "Rite-Hite" paving adapter
Trumbull Item Number 367-5050
The "RITE-HITE" adapter provides a method for
adjusting valve boxes to pavement level.
The adjustment range is from 2-1/2" to 8" |
|
If the existing valve box is too low, place the "RITE-HITE" inside the
existing box, pour stiff cement mortar around it and push down until the
"RITE-HITE" is flush with the pavement surface.
If the existing valve box is too high, break off the top of the valve box and insert the
"RITE-HITE". Then pour stiff cement mortar around it and push down until the
"RITE-HITE" is flush with the pavement surface.
|
Screw-type "Rite-Hite" paving adapter, No. T-69
Trumbull Item Number 367-5060
This type adapter screws into the top section of the valve box. The adjustment
range is from 2-1/2" to 8". |
|
Adjustable adapters accept standard valve box covers, as made by Bingham & Taylor,
Central Foundry, Tyler, etc. Please
refer to the separate product literature sheets for Valve Box Risers (1 ",
1-1/2", 2", 3", 4" and 6"), and for Trumbull Valve Box
Lids. |
|
