For customer service, please send your fax to: 1-800-726-1998 or call 1-800-726-1994.
2
DRAIN INLET PROTECTION
Note: All dimensions are nominal. All weights are for shipping purposes only. List prices are in U.S. Dollars.
The Drain Inlet Protection product line is to be used on construction sites as a
Best Management Practice (BMP) for NPDES regulation compliance.
All of the following products are used as a physical barrier on the ground
in front of storm drains to prevent silt, trash, and debris from washing into
the storm drain. Some benefits of these products are:
· Highly visible yellow color draws attention to the storm drain to
encourage proper maintenance on a job site.
· Patented woven seams provide a strong bond that gives the products
superior strength.
· Products are reusable and can be used from job site to job site.
· Strong bags are economical as they need to be replaced less than other
methods of drain inlet protection.
Gravel Bag and Snake Bags should be filled with clean 3/4" crushed or
1/4" pea gravel.
Fill bags 1/2 to 3/4 full. Do not overfill.
Drain Doughnut is tied to the storm drain grate.
F LOW
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
SNAKEBAG 4
Snake Bag in 4' Roll
Yellow
250
0.23
5.56
10SW Fabric structure is 34 x 20
wrap, and a high visibility
yellow color for safety.
Yarn is high-density
polyethylene. Water flow
is 100 gallons per sq. ft.
per minute when empty.
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
SNAKEBAG 6
Snake Bag in 6' Roll
Yellow
125
0.35
8.89
10SW Fabric structure is 34 x 20
wrap, and a high visibility
yellow color for safety.
Yarn is high-density
polyethylene. Water flow
is 100 gallons per sq. ft.
per minute when empty.
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
GRAVELBAG
Gravel Bag
Yellow
250
0.24
3.40
10SW Fabric structure is 34 x 20
wrap, and a high visibility
yellow color for safety.
Yarn is high-density
polyethylene. Water flow
is 100 gallons per sq. ft.
per minute when empty.
28"
19"
11"
11"
48"
48"
48"
8"
3"
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
DRN DOUGHNUT
Drain Doughnut
Yellow
1
0.88
48.89
10SW
Central ring is 8" in diameter and 3" in height
Fabric structure is 34 x 20
wrap, and a high visibility
yellow color for safety. Yarn
is high-density polyethylene.
Water flow is 100 gallons
per sq. ft. per minute.
Drain Inlet Protection products allow sediment to
settle out of run off so only filtered water will go
down the storm drain.
72"
3
For customer service, please send your fax to: 1-800-726-1998 or call 1-800-726-1994.
Note: All dimensions are nominal. All weights are for shipping purposes only. List prices are in U.S. Dollars.
FLO-WELL
®
STORM WATER LEACHING SYSTEM
Flo-Well
®
Storm Water Leaching System
With the Flo-Well, water can now be discharged into the subsoil rapidly and easily. Unlike
competitive systems, there is no need for piping systems to transport stormwater to a far-off
discharge point, large heavy equipment, considerable excavation of current landscaped areas,
nor large labor costs that those systems incur. With Flo-Well, water dispersion is now easier
than ever.
Go to www.NDSPRO.com/FloWell.asp for an easy to use online calculator that determines how
many Flo-Wells are required to meet your drainage needs.
For gutters and downspouts
Install with sump pumps
Eliminates puddles
Backwash tank
Current Applications
Discharge Stormwater into Subsoil
Installation
Flo-Well should be placed at least 10 feet from a structure or foundation.
Flo-Well should be piped to rain gutters using a 9" or 12" catch basin below each downspout outlet (see diagram above). Proper
drainage can be visually monitored, assuring that leaves and debris have not clogged the downspout.
Landscape Fabric
NDS#FWFF67
4" PVC pipe
FLO-WELL
®
NDS#FWAS24
Sand
Soil
12" Gravel*
Gravel*
FLO-WELL
®
NDS#FWAS24
4" PVC pipe
Soil
2' dia.
12" Sand
Flo-Well Installation Detail in Gravel Backfill
Flo-Well Installation Detail with Landscape
Fabric Wrap in Sand Backfill
*Class 2 Road Grade
4' dia.
2' dia.
4' dia.
8" Minimum
8" Minimum
Installation Note: Location and number of ports removed will determine the rate and direction of leaching.
* Add gravel around outside of Flo-Well unit to increase leaching capacity.
1 Knock out ports as
needed from inside
of panel
2 Slide panels
together
3 Optional Filter Fabric
to prevent sand and
debris from entering
Flo-Well
4 Place in ground
and set top cover
in place
*
5 Install pipe or
surface drain
6 Bury to minimum
of 8 inches deep
Water & Heavy
Sediment -IN
Water & Light
Sediment -OUT
SEDIMENT CONTAINMENT
Sediment Level
Sediment Level
Sediment Level
For customer service, please send your fax to: 1-800-726-1998 or call 1-800-726-1994.
4
FLO-WELL
®
STORM WATER LEACHING SYSTEM
Note: All dimensions are nominal. All weights are for shipping purposes only. List prices are in U.S. Dollars.
Flo-Well offers on-site solutions to retain stormwater and discharge it into the subsoil:
· Complies with new stormwater regulations.
· Installs without the need for heavy equipment.
· Cost effective solutions.
· Helps to replenish ground water table levels.
Construction Site Runoff
Post-Construction Site Runoff
*Consult local permitting authority for details
Flo-Well
®
Solutions for stormwater retention and discharge elimination
New stormwater regulations extend to projects disturbing more than 1 acre and mandate stormwater retention and discharge
elimination requirements for these projects. Regulations and permits now cover "any method of conveying surface water, including
streets, gutters, ditches, swales, or any other manmade structure that alters and/or directs wet-weather flows". These regulations
impact:
· Construction Site Runoff Control
· Post-construction Site Runoff Controls
And NDS offers solutions for Best Management Practices (BMPs).
Can be connected
Can be stacked up to 4 units
high (with center support pipe)
Can support heavy loads
Ideal as a stand-alone drain:
· Disturbs only 4 square feet of turf to install.
· Requires less than 10 cubic feet of soil removed to bury.
· Measures only 24" in diameter by 28.75" high.
· Weighs only 22 pounds.
· Holds over 48 gallons!
Or, connect to existing system for increased drainage
capabilities.
· Golf Course areas prone
to puddling.
· Playground areas under slides
and swings.
· Outdoor drinking fountain runoff.
· Outdoor showers at beaches.
· Wash down areas.
Larger 9" or 12" grates can be added
to Flo-Well to manage surface water.
This option is ideal for draining:
Ideal as a stand-alone reservoir:
· Collect and hold rainwater for lawn and garden irrigation.
(used with a pump connected to a garden hose).
· Connect Flo-Well to rain gutters using a catch basin &
grate below each downspout (see drawing above).
· Ideal solution for arid areas impacted by drought.
· Reservoir for pond and waterfall recirculation pumps.
Options
9" or 12"
square or atrium grate
(pages 16 & 18)
#930 or #1230
Low profile adapter
(pages 17 & 20)
#1243 Universal
Locking Outlet
(page 24)
4" SCH 40 Pipe
(4" S&D Pipe requires one 2P42
4" PVC Bushing)
5
For customer service, please send your fax to: 1-800-726-1998 or call 1-800-726-1994.
Note: All dimensions are nominal. All weights are for shipping purposes only. List prices are in U.S. Dollars.
FLO-WELL
®
STORM WATER LEACHING SYSTEM
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
24"
24"
28
3
/
4
"
6
3
/
8
"
4
1
/
2
"
7
1
/
4
"
9"
24"
24"
25
1
/
8
"
3
/
4
"
2'
7'
4
5
/
8
"
3
/
4
"
24
1
/
4
"
FWAS24
24" diam. x 28.75"H Flo-Well
®
Storm
Black
1
25.15
141.65
10FW
water leaching system
Includes 3 side panels,
1 Top Component
Fits 4" SCH-40 Pipe and 4" DWV Pipe
NDS #FWAS24 structural
foam polyolefin round
drywell system with UV
inhibitors. 24" dia., 28.75"
high, 49 gal. with 18- 1.5"
Knockout leaching ports
and 3- 4.5" knockout
inlet/outlet ports per panel.
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
FWAS24C 24" diam. Flo-Well
®
Cover
Black
2
8.00
43.37
10FW
Use with #FWAS24
NDS#FWAS24C structural
foam polyolefin round
drywell system cover with
UV inhibitors. 24 1/4" dia.,
4 5/8" height, 3/4" outer lip,
4.5" center knockout fits
NDS #FWAS24,
NDS #FWSPS3.
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
FWSPS3
Flo-Well
®
Side Panels/
Black
1
5.00
98.29
10FW
Extension Only
Includes 3 side panels; makes 1 round drywell.
Fits #FWAS24
(May also be used as a durable compost bin.)
NDS #FWSPS3 structural
foam polyolefin side panels
with UV inhibitors with 18-
1 1/2" knockout leaching
ports and 3- 4.5" knockout
inlet/outlet ports per panel.
24" high with recessed .75"
lip for firm stacking.
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
FWBP24
24" diam. Flo-Well
®
Bottom
Black
5
3.50
31.81
10FW
Fits #FWAS24
NDS #FWBP24 structural
foam polyolefin round
Flo-Well
®
bottom with UV
inhibitors. 24" diameter
with six 1 1/2" leaching
ports. 4.5" center knockout
for strut coupling.
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
FWSD69
4" SCH40 Surface Drain Inlet
Black
8
1.85
37.59
10FW
with Grate
Fits #FWAS24 and #FWAS24C
ADA Compliant
NDS #FWSD69 structural
foam polyolefin 6" grate
with 4" inlet with UV
inhibitors. 6" Diameter at
inlet. 9" high. 4.5" OD fits
Sch. 40 PVC fittings.
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
FWFF67
Porous Filter Fabric Wrap
Black
20
0.35
8.68
10FW
for Flo-Well
®
Use with #FWAS24
7' long x 2' wide to
surround Flo-Well
®
Drywell
System. Non-woven fabric.
Weight 1 oz. Mullen burst
175 psi. 200 GPM flow
through.
For customer service, please send your fax to: 1-800-726-1998 or call 1-800-726-1994.
6
POP-UP DRAINAGE EMITTER
Note: All dimensions are nominal. All weights are for shipping purposes only. List prices are in U.S. Dollars.
1"
5
15
/
16
"
3
7
/
16
"
1
1
/
4
"
1"
7
1
/
2
"
5
15
/
16
"
3
7
/
16
"
1
1
/
4
"
Allows water to flow to street without core drilling
the curb.
The Pop-Up Drainage Emitter is easy, safe and an
efficient solution.
· It allows water to be diverted and released to water-safe areas away from
structures, erosion-prone landscapes and poor drainage areas.
· It allows water captured by grates, catch basins, channel drains, Flo-Well,
downspouts and roof gutter systems to flow through the drainage pipe
and away from structural foundations to safe or useful areas. For example,
water can be routed from a low area next to a foundation to a water safe area
such as a curbside drainage system.
· It is opened by the hydrostatic pressure of water flowing through the drain pipe.
As flow diminishes the Emitter closes again. The special patented design allows
the Emitter to open with a negligible amount of pressure. Since the Emitter is
closed during dry weather, debris and rodents cannot enter the drain pipes.
· It does not rise high enough to interfere with mowers.
· Spring automatically retracts closes and prevents damage from lawn mowers.
· It blends into the surrounding landscapes.
1"
6
1
/
4
"
5
15
/
16
"
3
7
/
16
"
1
1
/
4
"
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
321
3" Emitter with Elbow
Green
25
0.60
15.30
10ND
May be used with Flo-Well to relieve overflow.
Can now be installed in vertical applications - ideal for discharging water from retaining walls and street curbs
Spring automatically retracts - prevents damage from lawn mowers.
Part Number 321 will be discontinued. Please use Part Number 430.
NDS #321,
3" Polyolefin Pop-Up
Drainage Emitter, Center
Drive Pop-Up with UV
inhibitor, PVC 90 degree
elbow with 1/4" Drain hole.
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
420
3" & 4" Pop-Up Drainage Emitter
Green
20
0.28
12.16
10ND
Fits 3" and 4" hub Sewer and Drain Fittings
Can now be installed in vertical applications - ideal for discharging water from
retaining walls and street curbs. Spring automatically retracts.
NDS #420, 3" and
4" Polyolefin Pop-Up
Drainage Emitter, Center
Drive Pop-Up with UV
inhibitor.
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
421
4" Emitter with Elbow
Green
20
0.85
18.92
10ND
May be used with Flo-Well to relieve overflow.
Can now be installed in vertical applications - ideal for discharging water from retaining walls and street curbs
Spring automatically retracts - prevents damage from lawn mowers.
Part Number 421 will be discontinued. Please use Part Number 430.
NDS #321, 4" Polyolefin
Pop-Up Drainage Emitter,
Center Drive Pop-Up with
UV inhibitor, PVC 90
degree elbow with 1/4"
Drain hole.
3" & 4" POP-UP DRAINAGE EMITTER
7
For customer service, please send your fax to: 1-800-726-1998 or call 1-800-726-1994.
Note: All dimensions are nominal. All weights are for shipping purposes only. List prices are in U.S. Dollars.
POP-UP DRAINAGE EMITTER
#430 is for all three pieces together
.
6
1
/
2
"
6"
4
9
/
16
"
8
3
/
8
"
1"
2
9
/
16
"
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
624
6" Pop-Up Emitter with Elbow
Green
15
3.45
72.77
10ND
and Corrugated Pipe Adapter
NDS #624 6" Polyolefin
Pop-Up Drainage Emitter,
Center Spring Loaded
Drive Pop-Up with UV
Inhibitor, PVC 90 degree
elbow wih 1/4" drain hole,
adapter fits 6" corrugated
pipe.
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
620
6" Pop-Up Drainage Emitter
Green
15
0.61
40.76
10ND NDS #620 6" Polyolefin
Pop-Up Drainage Emitter,
Center Spring Loaded
Drive Pop-Up with UV
inhibitor.
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
625
6" Pop-Up Emitter wih Spee-D Basin
Green
10
2.21
53.22
10ND NDS #625 6" Polyolefin
Pop-Up Drainage Emitter,
Center Spring Loaded
Drive Pop-Up wih UV
Inhibitor, with 6" Spee-D
Basin. Use with 3" or 4"
Sewer & Drain Pipe, 3" or
4" Corrugated Pipe, 4"
SCM 40 Pipe, and 3" & 4"
Triple Wall Pipe.
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
430
3" and 4" Pop-Up Drainage Emitter
Green
20
1.00
24.64
10ND
with Elbow and Universal Adapter
Universal Adapter fits 3" and 4" corrugated pipe, 3" and 4" sewer and drain pipe,
4" SCH. 40 pipe, and 3" and 4" triple wall pipe.
NDS #430 4" Polyolefin
Pop-Up Drainage Emitter,
Center Drive Spring
Loaded Pop-Up with UV
inhibitor, PVC 90 degree
elbow with 1/4" drain hole.
1"
5
1
/
4
"
5
15
/
16
"
3
7
/
16
"
1
1
/
4
"
1
3
/
4
"
7
15
/
16
"
5
7
/
16
"
2
1
/
8
"
1
3
/
4
"
8
13
/
16
"
7
15
/
16
"
5
7
/
16
"
2
1
/
8
"
1
3
/
4
"
7
15
/
16
"
5
7
/
16
"
2
1
/
8
"
6" POP-UP DRAINAGE EMITTER
For customer service, please send your fax to: 1-800-726-1998 or call 1-800-726-1994.
8
NDS CATCH BASINS AND GRATES FLEXIBLE BY DESIGN
Note: All dimensions are nominal. All weights are for shipping purposes only. List prices are in U.S. Dollars.
· Eliminate standing water and flooding on paved
areas and lawns.
· Easy to install, sized to fit your project with catch
basins from 6" to 24" and grates from 2" to 24".
· Prohibits structural damage to building
foundations.
· Choose from a wide variety of products to fit
every need.
Materials and Standards
· Ultraviolet-resistant one-piece injection-molded
structural foam polyolefin for maximum strength.
· Also available in brass, chrome and other materials.
· Installed properly, some plastic grates are suitable
for light vehicular traffic, plus we offer cast iron and
steel grates for heavier applications. Standards
vary per product: see individual product section for
details.
Sewer and Drain Fittings for
piping systems and downspouts.
See NDS Fittings Catalog.
Small Catch Basins for lawn
and landscape areas. See page 16.
Channel Drains for driveways,
pools, spas, patios, sidewalks and
wash-down areas. See pages 28-47.
Small Round, Square and
Atrium Grates for small lawn and
landscape areas, patios and atriums.
See pages 9-15.
Pop-Up Emitters for discharging
water on the surface. See page 6.
Large Catch Basins for large
lawn or landscape areas, residen-
tial driveways and garages. See
pages 16-25.
9
For customer service, please send your fax to: 1-800-726-1998 or call 1-800-726-1994.
Note: All dimensions are nominal. All weights are for shipping purposes only. List prices are in U.S. Dollars.
BRASS AND CHROME GRATES
NDS is committed to providing the highest quality solutions for your drainage problems. We use the highest quality brass. Our
brushed satin or polished finish is protected by a clear film that prevents damage to the finish during shipping and installation. Try this
exciting concept in drain grates for your next installation where quality and aesthetics are a must!
StrongPractical-Functional
Our solid cast brass grates are secured to PVC
collar with solid brass screws. The PVC collar
can be solvent welded into sewer and drain
fittings or pipe where permanent, anti-theft
installation is desired. The grate can still be
removed for easy cleanout.
· A unique mix of beauty and function.
· Recommended for highly-visible entry areas
in hotels, malls, office buildings, country clubs
and estates.
· Grates are removable from collars for easy
clean-out.
Details
· Solid cast brass grates are secured to a
PVC collar with solid brass screws for
aesthetics and reliability.
· Collar can be solvent-welded onto sewer
and drain fittings or pipes.
· Exceptional construction and fine finish
also make these grates ideal for deck
areas, walkways, swimming pools and
spas.
Materials and Standards
· Made with the highest-quality
solid brass.
· Brushed Satin and Polished Chrome
finishes are protected by a clear coat that
prevents damage to the finish
during shipping and installation.
12"
2
13
/
16
"
1
3
/
8
"
3
1
/
4
"
3
/
16
" Grate Opening
1
3
/
8
"
3
1
/
4
"
3
/
16
" Grate Opening
1
/
4
" x
7
/
8
"
Grate Opening
3
/
8
"
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
552B
1 ft. Brass Channel Grate
Satin Brass
12
1.25
70.86
25PF
553PB
1 ft. Brass Channel Grate
Polished Brass 12
1.25
72.36
25PF
Fits #500 and #550 Mini Channels. (See page 31.)
ADA Compliant/Heel-proof
NDS #552B or #553PB,
1 foot Mini Channel Solid
Brass Grate with brass
screws. Open surface area
10.00 square inches per
foot. 13.10 GPM per foot.
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
909B
3" Round Brass Grate w/PVC Collar
Satin Brass
20
0.40
19.83
15BR
905PB
3" Round Brass Grate w/PVC Collar
Polished Brass 20
0.40
29.87
15BR
Fits 2" SCH-40 Pipe and 3" Sewer and Drain Fittings.
ADA Compliant/Heel-proof
NDS #909B or 905PB,
3" Round Solid Brass
Grate and Brass screws
with PVC collar. Open
surface area 2.44 square
inches. 3.20 GPM.
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
915SC
3" Round Chrome Grate
Satin
20
0.40
15.53
15BR
w/PVC Collar
Chrome
907PC
3" Round Chrome Grate
Polished
20
0.40
23.27
15BR
w/PVC Collar
Chrome
Fits 3" Sewer and Drain Fittings and 2" SCH-40 Pipe
ADA Compliant/Heel-proof
NDS #915SC or #907PC,
3" Round Chrome Grate
and screws with PVC
collar. Open surface area
2.44 square inches.
3.20 GPM.
(See pg. 47)
(See pg. 47)
(See pg. 47)
For customer service, please send your fax to: 1-800-726-1998 or call 1-800-726-1994.
10
BRASS AND CHROME GRATES
Note: All dimensions are nominal. All weights are for shipping purposes only. List prices are in U.S. Dollars.
(See pg. 47)
(See pg. 47)
(See pg. 47)
1
3
/
4
"
4
1
/
4
"
1
/
4
" Grate Opening
2"
6
11
/
16
"
3
/
8
" Grate Opening
1
3
/
4
"
4
1
/
4
"
1
/
4
" Grate Opening
1
3
/
4
"
3
/
16
"
4
3
/
4
"
4
1
/
8
"
3
/
8
" Grate Opening
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
910B
4" Round Brass Grate w/PVC Collar
Satin Brass
20
0.70
22.59
15BR
906PB
4" Round Brass Grate w/PVC Collar
Polished Brass 20
0.70
37.64
15BR
Fits 3" Sewer & Drain Pipe, 4" Sewer & Drain Fittings.
ADA Compliant/Heel-proof
NDS #910B or #906PB,
4" Round Solid Brass
Grate and Brass screws
with PVC collar. Open
surface area 5.25 square
inches. 6.88 GPM.
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
917SC
4" Round Chrome Grate
Satin
20
0.70
17.48
15BR
w/PVC Collar
Chrome
908PC
4" Round Chrome Grate
Polished
20
0.70
29.09
15BR
w/PVC Collar
Chrome
Fits 3" Sewer & Drain Pipe, 4" Sewer & Drain Fittings.
ADA Compliant/Heel-proof
NDS #917SC or #908PC,
4" Round Chrome Grate
and screws with PVC
collar. Open surface area
5.25 square inches.
6.88 GPM.
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
918B
6" Round Brass Grate
Satin
8
1.38
59.56
15BR
w/Styrene Collar
Brass
919PB
6" Round Brass Grate
Polished
8
1.38
60.40
15BR
w/Styrene Collar
Brass
Fits Spee-D Basin, 6" Sewer & Drain Pipe & Fittings.
ADA Compliant
NDS #918B or #919PB,
6" Round Solid Brass
Grate and Brass screws
with styrene collar.
Open surface area
13.15 square inches.
17.23 GPM.
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
913B
5" Square Brass Grate
Satin
10
1.40
39.91
15BR
w/Styrene Collar
Brass
914PB
5" Square Brass Grate
Polished
10
1.40
44.93
15BR
w/Styrene Collar
Brass
Fits 4" Sewer and Drain Fittings, 3" Sewer and Drain Pipe
and 3" Triple Wall Pipe.
ADA Compliant
NDS #913B or #914PB,
5" Square Solid Brass
Grate with brass screws
and styrene collar. Open
surface area 3.00 square
inches. 3.93 GPM.
(See pg. 47)
11
For customer service, please send your fax to: 1-800-726-1998 or call 1-800-726-1994.
Note: All dimensions are nominal. All weights are for shipping purposes only. List prices are in U.S. Dollars.
BRASS AND CHROME GRATES/ROUND GRATES
ROUND GRATES
(See pg. 47)
(See pg. 47)
1
5
/
8
"
3
/
16
" Grate Opening
3
9
/
16
"
3"
1
1
/
2
"
1
/
4
" Grate Opening
4
5
/
8
"
3
15
/
16
"
(See pg. 47)
(See pg. 47)
6
1
/
8
"
3
15
/
16
"
3
/
8
" Grate Opening
2
3
/
4
"
3
/
4
"
6
1
/
8
"
6
15
/
16
"
2
3
/
4
"
(See pg. 47)
7
/
8
"
3
/
8
" Grate Opening
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
920B
6" Square Brass Grate
Satin
8
1.88
59.56
15BR
w/Styrene Adaptor
Brass
923PB
6" Square Brass Grate
Polished
8
1.88
60.40
15BR
w/Styrene Adaptor
Brass
Fits 3" or 4" Sewer and Drain Pipe or Fittings, 3" or 4" Corrugated Pipe and
3" or 4" Triple Wall Pipe.
ADA Compliant
NDS #920B or #923PB,
6" Square Solid Brass
Grate with brass colored
styrene low profile adapter
and brass screws. Open
surface area 22.96 square
inches. 30.08 GPM.
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
921B
6" Square Brass Grate
Satin
8
1.88
59.56
15BR
w/Styrene Adaptor
Brass
922PB
6" Square Brass Grate
Polished
8
1.88
60.40
15BR
w/Styrene Adaptor
Brass
Fits Spee-D Basin, 6" Sewer and Drain Pipe & Fittings.
ADA Compliant
NDS #921B or #922PB,
6" Square Solid Brass
Grate with brass colored
styrene low profile adapter
and brass screws. Open
surface area 22.96 square
inches. 30.08 GPM.
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
1214
12"x 12" Square Grate Manganese Bronze
1
9.00
464.49
10ND
Use with 12"x12" Catch Basin Series. Screws in tab on the frame, will secure the
frame to the outside edge of 12" x 12" catch Basin Adapter. Note: (Frame must be
attached to catch basin before backfilling or encasing in concrete.)
ADA Compliant/Heel-proof
NDS #1214, 12" Square
Manganese Bronze Grate
and Frame. Open surface
area 36.75 square inches.
48.14 GPM.
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
14
3" Round Grate
Black
40
0.15
2.47
10ND
15
3" Round Grate
Gray
40
0.15
2.47
10ND
16
3" Round Grate
Green
40
0.15
2.47
10ND
16S
3" Round Grate
Sand
40
0.15
2.47
10ND
Fits 3" Sewer and Drain Pipe & Fittings, 3" Corrugated Pipe and
3" Triple Wall Pipe.
ADA Compliant/Heel-proof
NDS #14, #15, #16, or
#16S, 3" Round Structural
Foam Polyolefin Grate with
UV inhibitor. Open surface
area 2.60 square inches.
3.41 GPM.
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
11
4" Round Grate
Black
25
0.20
2.62
10ND
12
4" Round Grate
Gray
25
0.20
2.62
10ND
13
4" Round Grate
Green
25
0.20
2.62
10ND
13S
4" Round Grate
Sand
25
0.20
2.62
10ND
Fits 4" Sewer and Drain Pipe & Fittings, 4" Corrugated Pipe, and
4" Triple Wall Pipe.
ADA Compliant/Heel-proof
NDS #11, #12, #13, or
#13S, 4" Round Structural
Foam Polyolefin Grate with
UV inhibitor. Open surface
area 3.85 square inches.
5.04 GPM.
1
/
2
"
3
/
4
"
12
1
/
4
"
12"
1
/
4
" Grate Opening
1
3
/
16
"
For customer service, please send your fax to: 1-800-726-1998 or call 1-800-726-1994.
12
ROUND GRATES
Note: All dimensions are nominal. All weights are for shipping purposes only. List prices are in U.S. Dollars.
(See pg. 47)
(See pg. 47)
(See pg. 47)
2
3
/
8
"
1
/
4
" Grate Opening
6
3
/
4
"
5
3
/
4
"
2
1
/
2
"
7
3
/
4
"
9
3
/
4
"
14
3
/
16
"
1
/
2
"
1
/
2
"
5
3
/
4
"
7
3
/
4
"
2
3
/
4
"
11
5
/
8
"
11
3
/
4
"
3
5
/
8
"
5
/
16
"
Grate Opening
5
/
16
"
Grate Opening
9
/
16
"
Grate Opening
17"
14
7
/
8
"
4
1
/
2
"
1
1
/
4
" Grate Opening
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
40
6" Round Grate
Black
10
0.80
7.32
10ND
50
6" Round Grate
Green
10
0.80
7.32
10ND
60
6" Round Grate
Gray
10
0.80
7.32
10ND
60S
6" Round Grate
Sand
10
0.80
7.32
10ND
Fits Spee-D Basin, 6" Sewer and Drain Pipe and Fittings and 6" Corrugated Pipe.
ADA Compliant/Heel-proof
NDS #40, #50, #60, or
#60S, 6" Round Structural
Foam Polyolefin Grate with
UV inhibitor. Open surface
area 9.10 square inches.
11.92 GPM.
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
10
8" Round Grate
Black
10
0.80
7.71
10ND
20
8" Round Grate
Green
10
0.80
7.71
10ND
30
8" Round Grate
Gray
10
0.80
7.71
10ND
30S
8" Round Grate
Sand
10
0.80
7.71
10ND
Fits Spee-D Basin, 6" Sewer and Drain Pipe and Fittings and 6" Corrugated Pipe.
ADA Compliant
NDS #10, #20, #30, or
#30S, 6" Round Structural
Foam Polyolefin Grate with
UV inhibitor. Open surface
area 11.50 square inches.
15.07 GPM.
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
1040
10" Round Grate
Black
10
1.50
14.19
10ND
1050
10" Round Grate
Green
10
1.50
14.19
10ND
1060
10" Round Grate
Gray
10
1.50
14.19
10ND
1060S
10" Round Grate
Sand
10
1.50
14.19
10ND
Fits 8" Sewer and Drain Pipe and Fittings, 8" Corrugated Pipe.
ADA Compliant
NDS #1040, #1050, #1060,
or #1060S,
8" Round Structural Foam
Polyolefin Grate with UV
inhibitor. Open surface
area 17.46 square inches.
22.87 GPM.
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
1240
12" Round Grate
Black
6
3.35
40.00
10ND
1250
12" Round Grate
Green
6
3.35
40.00
10ND
1260
12" Round Grate
Gray
6
3.35
40.00
10ND
Fits 12" Sewer and Drain Pipe, 12" Corrugated Pipe.
NDS #1240, #1250, #1260,
12" Round Structural Foam
Polyolefin Grate with UV
inhibitor. Open surface
area 46.00 square inches.
60.26 GPM.
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
1511
15" Round Grate
Black
1
6.15
77.13
10ND
1512
15" Round Grate
Green
1
6.15
77.13
10ND
Fits 15" Sewer and Drain Pipe and Fittings, 15" Corrugated Pipe.
NDS #1511, #1512,
15" Round Structural Foam
Polyolefin Grate with UV
inhibitor. Open surface
area 85.60 square inches.
112.14 GPM.
(See pg. 47)
(See pg. 47)
13
For customer service, please send your fax to: 1-800-726-1998 or call 1-800-726-1994.
Note: All dimensions are nominal. All weights are for shipping purposes only. List prices are in U.S. Dollars.
ATRIUM GRATES
2
7
/
8
"
1
1
/
4
"
2
3
/
8
"
1
3
/
8
"
1
/
4
" Grate Openings
3
11
/
16
"
1
23
/
32
"
2
7
/
8
"
2
1
/
4
"
1
/
4
" Grate Openings
4
7
/
16
"
1
7
/
8
"
4
3
/
16
"
2
3
/
4
"
1
/
4
" Grate Openings
5
3
/
4
"
2
13
/
16
"
5
3
/
4
"
3
7
/
8
"
1
/
4
" Grate Openings
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
270
2" Atrium Grate
Gray
20
0.10
4.51
10ND
Fits 2" Schedule 40 Fittings.
NDS #270, Flat Top
Structural Form Polyolefin
Atrium Grate with UV
inhibitor. Open surface
area 4.00 square inches.
5.24 GPM.
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
70
3" Atrium Grate
Green
20
0.25
5.79
10ND
72
3" Atrium Grate
Gray
20
0.25
5.79
10ND
74
3" Atrium Grate
Black
20
0.25
5.79
10ND
74S
3" Atrium Grate
Sand
20
0.25
5.79
10ND
Fits 3" Sewer and Drain Pipe and Fittings, 3" Corrugated Pipe and
3" Triple Wall Pipe.
NDS #70, #72, #74, #74S,
Flat Top Structural Foam
Polyolefin Atrium Grate
with UV inhibitor. Open
surface area 9.40 square
inches. 12.31 GPM.
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
75
4" Atrium Grate
Green
20
0.30
8.73
10ND
76
4" Atrium Grate
Gray
20
0.30
8.73
10ND
78
4" Atrium Grate
Black
20
0.30
8.73
10ND
78S
4" Atrium Grate
Sand
20
0.30
8.73
10ND
Fits 4" Sewer and Drain Pipe and Fittings, 4" Corrugated Pipe and
4" Triple Wall Pipe.
NDS #75, #76, #78, or
#78S, Flat Top Structural
Foam Polyolefin Atrium
Grate with UV inhibitor.
Open surface area
17.00 square inches.
22.27 GPM.
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
80
6" Atrium Grate
Green
10
0.70
11.71
10ND
81
6" Atrium Grate
Gray
10
0.70
11.71
10ND
90
6" Atrium Grate
Black
10
0.70
11.71
10ND
90S
6" Atrium Grate
Sand
10
0.70
11.71
10ND
Fits Spee-D Basin, 6" Sewer and Drain Pipe and Fittings,
6" Corrugated Pipe.
NDS #80, #81, #90, or
#90S, Flat Top Structural
Foam Polyolefin Atrium
Grate with UV inhibitor.
Open surface area
28.40 square inches.
37.20 GPM.
For customer service, please send your fax to: 1-800-726-1998 or call 1-800-726-1994.
14
SQUARE GRATES
Note: All dimensions are nominal. All weights are for shipping purposes only. List prices are in U.S. Dollars.
(See pg. 47)
(See pg. 47)
(See pg. 47)
(See pg. 47)
1
5
/
16
"
3
9
/
16
"
3"
3
/
16
" Grate Opening
1
13
/
16
"
4
9
/
16
"
3
15
/
16
"
3
/
16
" Grate Opening
2"
5
7
/
8
"
3
7
/
8
"
1
/
4
" Grate Opening
2
1
/
2
"
5
7
/
8
"
1
1
/
2
"
3
15
/
16
"
1
/
4
" Grate Opening
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
01
4" Square Grate
Green
40
0.11
3.10
10ND
02
4" Square Grate
Black
40
0.11
3.10
10ND
03
4" Square Grate
Gray
40
0.11
3.10
10ND
Fits 3" Sewer and Drain Pipe and Fittings, 3" Corrugated Pipe and
3" Triple Wall Pipe.
ADA Compliant/Heel-proof
NDS #01, #02, #03,
4" Square Structural Foam
Polyolefin Grate with
diagonally converging
pattern with UV inhibitor.
Open surface area 3.45
square inches. 4.52 GPM.
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
07
5" Square Grate
Green
25
0.20
3.39
10ND
08
5" Square Grate
Black
25
0.20
3.39
10ND
09
5" Square Grate
Gray
25
0.20
3.39
10ND
Fits 4" Sewer and Drain Pipe and Fittings, 4" Corrugated Pipe and
4" Triple Wall Pipe.
ADA Compliant/Heel-proof
NDS #07, #08, #09, or
#09S, 5" Square Structural
Foam Polyolefin Grate with
diagonally converging
pattern with UV inhibitor.
Open surface are 4.25
square inches. 5.57 GPM.
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
04
6" Square Grate
Black
10
0.40
5.16
10ND
05
6" Square Grate
Green
10
0.40
5.16
10ND
06
6" Square Grate
Gray
10
0.40
5.16
10ND
06S
6" Square Grate
Sand
10
0.40
5.16
10ND
Fits 3" or 4" Sewer and Drain Pipe, 3" or 4" Corrugated Pipe and
3" or 4" Triple Wall Pipe.
ADA Compliant/Heel-proof
NDS #04, #05, #06, or
#06S, 6" Square Structural
Foam Polyolefin Grate with
diagonally converging
pattern with UV inhibitor.
Open surface area
10.40 square inches.
13.62 GPM.
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
640
6" x 6" x 4" Sq Grate & Adapter
Black
8
0.88
16.49
10ND
641
6" x 6" x 4" Sq Grate & Adapter
Green
8
0.88
16.49
10ND
642
6" x 6" x 4" Sq Grate & Adapter
Gray
8
0.88
16.49
10ND
Fits 3" or 4" Sewer and Drain Pipe and Fittings, 3" or 4" Corrugated Pipe
and 3" or 4" Triple Wall Pipe.
ADA Compliant/Heel-proof
NDS #640, #641, #642,
#637, #638, #639, 6"x6"
Low Profile Adapter and
Structural Foam Polyolefin
Removable Grate with UV
inhibitor and stainless steel
screws. Open surface area
13.61 square inches.
17.83 GPM.
(See pg. 47)
2
3
/
4
"
5
7
/
8
"
2"
5
7
/
8
"
6
3
/
16
"
6
9
/
16
"
1
/
4
" Grate
Opening
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
637
6" x 6" x 6" Sq Grate & Adapter
Black
8
0.88
16.49
10ND
638
6" x 6" x 6" Sq Grate & Adapter
Green
8
0.88
16.49
10ND
639
6" x 6" x 6" Sq Grate & Adapter
Gray
8
0.88
16.49
10ND
Fits Spee-D Basin, 6" Sewer & Drain Pipe and Fittings.
ADA Compliant/Heel-proof
NDS #640, #641, #642,
#637, #638, #639, 6"x6"
Low Profile Adapter and
Structural Foam Polyolefin
Removable Grate with UV
inhibitor and stainless steel
screws. Open surface area
13.61 square inches.
17.83 GPM.
6
3
/
16
"
6
3
/
16
"
15
For customer service, please send your fax to: 1-800-726-1998 or call 1-800-726-1994.
Note: All dimensions are nominal. All weights are for shipping purposes only. List prices are in U.S. Dollars.
SQUARE GRATES/SPEE-D BASINS
6
1
/
2
"
6"
4
9
/
16
"
8
3
/
8
"
1"
2
9
/
16
"
S
6
1
/
2
"
6"
4
9
/
16
"
7
7
/
8
"
1"
2
9
/
16
"
SPEE-D BASINS
(See pg. 47)
(See pg. 47)
4
3
/
4
"
7
7
/
8
"
5
7
/
8
"
1
/
4
" Grate Opening
2
1
/
2
"
8
7
/
8
"
5
7
/
8
"
5
/
16
" Grate Opening
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
881
8" Square Grate
Black
10
0.80
8.17
10ND
882
8" Square Grate
Green
10
0.80
8.17
10ND
883
8" Square Grate
Gray
10
0.80
8.17
10ND
883S
8" Square Grate
Sand
10
0.80
8.17
10ND
Fits Spee-D Basin, 6" Sewer and Drain Pipe and Fittings, 6" Corrugated Pipe
and DWV Pipe.
ADA Compliant/Heel-proof
NDS #881, #882, #883,
or #883S, 8" Square
Structural Foam Polyolefin
Grate with UV inhibitor.
Open surface area
17.16 square inches.
22.48 GPM.
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
950
9" Square Grate
Green
10
1.90
12.64
10ND
960
9" Square Grate
Gray
10
1.90
12.64
10ND
970
9" Square Grate
Black
10
1.90
12.64
10ND
970S
9" Square Grate
Sand
10
1.90
11.91
10ND
Fits Spee-D Basin, 6" Sewer and Drain Pipe and Fittings, 6" Corrugated Pipe.
ADA Compliant
NDS #950, #960, #970,
#970S, 9" Square
Structural Foam Polyolefin
Grate with UV inhibitor.
Open surface area 28.40
square inches. 37.20 GPM.
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
101
1 - 3" and 4" Locking Outlet *
Black
10
1.60
12.46
10ND
201
2 - 3" and 4" Locking Outlets *
Black
10
1.90
12.46
10ND
#101, #201 Outlets fit 3" or 4" Sewer & Drain Pipe, 3" or 4" Corrugated Pipe.
#101 Outlet also fits 4" SCH 40 and 3" & 4" Triple Wall Pipe.
Use NDS #66 as Riser for all 6" round catch basins (see S&D fitting price catalog).
*New Locking Outlet snaps on to most 3" and 4" corrugated pipe.
NDS #101 and #201 with
locking outlet #250, #300,
or #350, 6" Spee-D Catch
Basin. Patent #D402,013.
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
250
2 - 3" and 4" 90° Outlets
Black
12
1.92
12.46
10ND
300
3 - 3" and 4" Outlets
Black
12
1.92
21.37
10ND
350
4 - 3" and 4" Outlets
Black
12
2.25
24.95
10ND
#250, #300, #350 Outlets fit 4" Sewer & Drain Pipe, 3" and 4" Corrugated Pipe and
DWV Pipe, 4" SCH 40 Pipe, 4" Sewer and Drain Fittings. Use NDS #66 as Riser for all
6" round catch basins (see S&D fitting price catalog).
NDS #101 and #201 with
locking outlet #250, #300,
or #350, 6" Spee-D Catch
Basin.
(See pg. 47)
2
3
/
8
"
6
7
/
8
"
5
7
/
8
"
1
/
4
" Grate Opening
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
771
7" Square Grate
Black
10
0.70
7.49
10ND
772
7" Square Grate
Green
10
0.70
7.49
10ND
773
7" Square Grate
Gray
10
0.70
7.49
10ND
773S
7" Square Grate
Sand
10
0.70
7.49
10ND
Fits Spee-D Basin, 6" Sewer and Drain Pipe and Fittings, 6" Corrugated Pipe.
ADA Compliant/Heel-proof
NDS #771, #772, #773,
or #773S, 7" Square
Structural Foam Polyolefin
Grate with UV inhibitor.
Open surface area
13.60 square inches.
17.83 GPM.
101
201
250
300
350
For customer service, please send your fax to: 1-800-726-1998 or call 1-800-726-1994.
16
9" CATCH BASIN SERIES
Note: All dimensions are nominal. All weights are for shipping purposes only. List prices are in U.S. Dollars.
4
3
/
4
"
1
1
/
8
"
9"
3
/
8
" Grate Openings
(See pg. 47)
1
1
/
8
"
8
3
/
4
"
3
/
4
" Grate Opening
(See pg. 47)
1
1
/
8
"
9"
9
/
16
" Grate Opening
(See pg. 47)
1
1
/
8
"
9"
7
/
16
" Grate Opening
8
1
/
8
"
1
1
/
16
"
2
5
/
16
"
10
1
/
8
"
9
3
/
8
"
5
9
/
16
"
1
1
/
8
"
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
981
9" x 9" Atrium Grate
Black
6
0.87
26.51
10ND
991
9" x 9" Atrium Grate
Green
6
0.87
26.51
10ND
Use with 9"x9" Catch Basin Series.
NDS #981, #991, 9"
Structural Foam Polyolefin
Dome Atrium Grate with
UV inhibitor. Open surface
area 31.50 square inches.
41.27 GPM.
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
980
9" Square Grate
Black
8
1.50
22.98
10ND
990
9" Square Grate
Green
8
1.50
22.98
10ND
999
9" Square Grate
Gray
8
1.50
22.98
10ND
999S
9" Square Grate
Sand
8
1.50
22.98
10ND
Use with 9"x9" Catch Basin Series.
See page 47 for installation details.
ADA Compliant
NDS #980, #990, #999, or
#999S, 9" Square
Structural Foam Polyolefin
Grate with UV inhibitor.
Open surface area 39.50
square inches.
51.75 GPM.
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
913
9" Square Cast Iron Grate
Black
1
8.40
67.61
10ND
Use with 9"x9" Catch Basin Series.
See page 47 for installation details.
NDS #913, 9" Square
Heavy Duty Cast Iron
Grate. Open surface area
35.70 square inches.
46.77 GPM.
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
915
9" Square Galvanized Steel Grate
Galvanized
1
4.23
58.19
10ND
Steel
Use with 9"x9" Catch Basin Series.
See page 47 for installation details.
NDS #915, 9" Square
Heavy Duty Galvanized
Steel Bar Grate. Open
surface area 65.00 square
inches. 85.15 GPM.
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
900
9" x 9" Catch Basin 2-opening
Black
4
3.00
17.79
10ND
900-4
9" x 9" Catch Basin 4-opening
Black
4
2.00
19.61
10ND
Requires either #1206, #1242, #1243, #1245, #1266 or #1889
Universal Outlet for each Opening. (See page 24.)
NDS #900, or #900-4,
9" x 9" Tapered
Catch Basin.
17
For customer service, please send your fax to: 1-800-726-1998 or call 1-800-726-1994.
Note: All dimensions are nominal. All weights are for shipping purposes only. List prices are in U.S. Dollars.
9" CATCH BASIN SERIES
2
1
/
16
"
9
7
/
16
"
8"
10
7
/
8
"
2"
4
1
/
4
"
9
1
/
2
"
2
1
/
4
"
5
3
/
4
"
1
1
/
8
"
1
1
/
8
"
1
1
/
8
"
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
930
9" x 9" Low Profile Adapter
Black
8
0.75
16.00
10ND
Fits Corrugated, Sewer and Drain Pipe.
Requires NDS #1242, #1243, #1245, #1266 or #1889 Universal Outlets.
(See page 24.)
NDS #930, 9"x9" Low
Profile Adapter with
Bayonet Bottom Outlet.
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
931
9" x 9" Deep Housing
Black
10
2.40
12.64
10ND
Spigot Adapter
Fits 4" Corrugated Pipe.
Use #933 to adapt to 4" Sewer and Drain Pipe.
933
Adapter Bushing
Black
20
0.30
2.22
10ND
Fits 4" Sewer and Drain Pipe.
Use Housing Adapter Bushing with #931.
NDS #931, 9"x9" Square
Deep Housing Spigot
Adapter.
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
932
9" x 9" Low Profile Housing Adapter
Black
8
1.13
22.88
10ND
Fits 6" Spee-D Basin and 6" Sewer and Drain Pipe and Fittings.
NDS #932, 9"x9" Square
Low Profile Housing
Adapter with 6" Outlet.
9"
1
1
/
8
"
7
3
/
8
"
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
916
9" x 9" Catch Basin Riser
Black
4
1.75
15.63
10ND
(No Bottom)
Use with 9" x 9" Catch Basin Series.
NDS #916, 6" Riser for
9" x 9" Catch Basin.
9
3
/
16
"
For customer service, please send your fax to: 1-800-726-1998 or call 1-800-726-1994.
18
12" CATCH BASIN SERIES
Note: All dimensions are nominal. All weights are for shipping purposes only. List prices are in U.S. Dollars.
(See pg. 47)
(See pg. 47)
6"
1
1
/
8
"
11
3
/
4
"
3
/
8
" Grate Opening
11
7
/
8
"
3
/
8
" Grate Opening
3
/
8
" Grate Opening
12"
1
/
2
"
12
1
/
4
"
12"
11
5
/
8
"
3
/
4
" Grate Opening
1
/
4
" Grate Opening
1
1
/
8
"
1"
1
1
/
8
"
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
1280
12" x 12" Atrium Grate
Green
8
2.00
39.35
10ND
1290
12" x 12" Atrium Grate
Black
8
2.00
39.35
10ND
Use with 12" x 12" Catch Basin Series.
NDS #1280, #1290, 12"
Structural Foam Polyolefin
Dome Atrium Grate with
UV inhibitor. Open surface
area 50.60 square inches.
66.29 GPM.
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
1210
12" x 12" Square Grate
Gray
8
2.00
34.12
10ND
1211
12" x 12" Square Grate
Black
8
2.00
34.12
10ND
1212
12" x 12" Square Grate
Green
8
2.00
34.12
10ND
1212S
12" x 12" Square Grate
Sand
8
2.00
34.12
10ND
Use with 12" x 12" Catch Basin Series.
See page 47 for installation details.
ADA Compliant
NDS #1210, #1211, #1212,
or #1212S, 12" Square
Structural Foam Polyolefin
Grate with UV inhibitor.
Open surface area
50.76 square inches.
66.50 GPM.
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
1213
12" x 12" Square Cast Iron Grate
Black
1
15.00
73.35
10ND
Use with 12" x 12" Catch Basin Series.
See page 47 for installation details.
ADA Compliant
NDS #1213, 12" Square
Heavy Duty Cast Iron
Grate. Open surface area
59.50 square inches.
77.95 GPM.
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
1215
12" x 12" Square Galvanized
Galvanized
1
8.90
104.60
10ND
Steel Grate
Steel
Use with 12" x 12" Catch Basin Series.
See page 47 for installation details.
NDS #1215, 12" Square
Heavy Duty Galvanized
Steel Bar Grate. Open
surface area 122.30
square inches.
160.21 GPM.
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
1214
12" x 12" Square Grate
Manganese
1
9.00
464.49
10ND
Bronze
Use with 12" x 12" Catch Basin Series. Screws in tabs on the frame,
will secure the frame to the outside edge of 12" x 12" catch Basin Adapter. Note:
(Frame must be attached to catch basin before backfilling or
encasing in concrete.)
ADA Compliant/Heel-proof
NDS #1214, 12" Square
Manganese Bronze Grate
and Frame. Open surface
area 36.75 square inches.
48.14 GPM.
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
1220
12" x 12" Sump Box Cover
Black
8
2.00
32.37
10ND
Use with NDS 12" x 12" Catch Basin Series and
NDS #1219 Backwater Valve Box.
NDS #1220, 12" Square
Strucutral Foam Polyolifin
Solid Cover.
(See pg. 47)
(See pg. 47)
3
/
4
"
1
/
4
"
11
7
/
8
"
3
/
4
" 1
3
/
16
"
19
For customer service, please send your fax to: 1-800-726-1998 or call 1-800-726-1994.
Note: All dimensions are nominal. All weights are for shipping purposes only. List prices are in U.S. Dollars.
12" CATCH BASIN SERIES
12
5
/
16
"
7
1
/
8
"
1
1
/
8
"
10
1
/
8
"
2
3
/
8
"
3
3
/
4
"
12
15
/
16
"
12
3
/
8
"
12
3
/
8
"
11
1
/
2
"
2
1
/
2
"
11"
2 "
1
1
/
8
"
11"
14
1
/
2
"
12
3
/
8
"
7
3
/
8
"
5
15
/
16
"
1
1
/
8
"
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
1200
12" x 12" Catch Basin, 2 Openings
Black
4
4.25
30.39
10ND
1203
12" x 12" Catch Basin, 3 Openings
Black
4
3.75
37.56
10ND
1204
12" x 12" Catch Basin, 4 Openings
Black
4
3.75
41.17
10ND
Requires either #1206, #1242, #1243, #1245, #1266 or #1889 Universal Outlet for each opening.
(Use bottom cutout for additional outlet. See page 24.)
NDS #1200, #1203, or
#1204, 12" x 12" Tapered
Catch Basin.
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
1216
6" Catch Basin Riser
Black
8
2.75
17.76
10ND
(No Bottom)
Use with 12"x12" Catch Basin Series.
NDS #1216, 6" Riser for
12" Catch Basin.
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
1217
12" x 12" Riser
Black
4
4.00
23.36
10ND
with 2 openings
Nests on top of 12" catch basin series for shallow outlets and 12" sump box for more sump area.
Requires either #1206, #1242, #1243, #1245, #1266 or #1889 Universal Outlet for each opening.
(See page 24.)
NDS #1217, 12" Riser with
Two Openings.
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
1225
12" x 12" Sump Box
Black
4
6.75
34.73
10ND
Use with 12" x 12" Grate or #1220 Valve Box Cover.
NDS #1225, one piece 12"
Sump Box.
12
3
/
8
"
For customer service, please send your fax to: 1-800-726-1998 or call 1-800-726-1994.
20
12" CATCH BASIN SERIES/18" CATCH BASIN SERIES
Note: All dimensions are nominal. All weights are for shipping purposes only. List prices are in U.S. Dollars.
18" CATCH BASIN SERIES
3
7
/
16
"
12
1
/
4
"
5
15
/
16
"
12
1
/
4
"
4
1
/
8
"
8
5
/
8
"
16
7
/
8
"
16
7
/
8
"
6"
1"
16
13
/
16
"
1
/
2
" Grate Opening
(See pg. 47)
1"
1"
7
/
16
" Grate Opening
1
1
/
8
"
1
1
/
8
"
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
1230
12" x 12" Low Profile Adapter
Black
8
1.25
21.40
10ND
Requires either #1242, #1243, #1245, #1266 or #1889 Universal Outlet
for connection to 3", 4", or 6" Sewer and Drain or Corrugated Pipe.
(See page 24.)
NDS #1230, 12" x 12"
Low Profile Adapter with
Bayonet Bottom Outlet.
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
1221
12" x 12" Square, Low
Black
12
1.92
25.66
10ND
Profile Adapter
Fits 8" Sewer and Drain Pipe.
See page 47 for installation details.
1222
12" x 12" Square,
Black
12
1.92
25.66
10ND
Low Profile Spigot Adapter
Fits 8" Corrugated Pipe.
NDS #1221, or #1222,
12" x 12" Low Profile
Adapter.
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
1881
18" x 18" Atrium Grate
Black
4
3.50
78.56
10ND
1891
18" x 18" Atrium Grate
Green
4
3.50
78.56
10ND
Use with 18" x 18" Catch Basin Series.
NDS #1881, #1891, 18"
Structural Foam Polyolefin
Dome Atrium Grate with
UV inhibitor. Open surface
area 89.40 square inches.
117.11 GPM.
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
1810
18" x 18" Square Grate
Gray
4
5.50
64.71
10ND
1811
18" x 18" Square Grate
Black
4
5.50
64.71
10ND
1812
18" x 18" Square Grate
Green
4
5.50
64.71
10ND
Use with 18" x 18" Catch Basin Series.
ADA Compliant
NDS #1810, #1811, #1812,
#1812S, 18" Square
Structural Foam Polyolefin
Grate with UV inhibitor.
Open surface area
104.00 square inches.
136.24 GPM.
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
1813
18" x 18" Cast Iron Square Grate
Black
1
35.00
249.97
10ND
Use with 18" x 18" Catch Basin Series.
See page 47 for installation details.
NDS #1813, 18" Square
Heavy Duty Cast Iron
Grate. Open surface area
105.75 square inches.
138.53 GPM.
H-20 Load Rating.
1" Grate Opening
(See pg. 47)
21
For customer service, please send your fax to: 1-800-726-1998 or call 1-800-726-1994.
Note: All dimensions are nominal. All weights are for shipping purposes only. List prices are in U.S. Dollars.
18" CATCH BASIN SERIES
19
1
/
4
"
18
1
/
8
"
9"
7
7
/
8
" Nesting height
18
1
/
8
"
1"
16
3
/
4
"
1" Grate Openings
18
9
/
16
"
17
11
/
16
"
13"
11
1
/
4
"
6
1
/
4
"
6
1
/
4
"
9
1
/
2
"
1"
1"
1"
17
7
/
8
"
1
1
/
4
"
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
1815
18" Square Galvanized Steel Grate
Galvanized
1
17.00
163.61
10ND
Steel
Use with 18"x18" Catch Basin Series.
See page 47 for installation details.
NDS #1815, 18" Square
Heavy Duty Galvanized
Steel Bar Grate. Open
surface area 291.00
square inches.
381.21 GPM.
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
1882
18" One Piece Catch
Black
1
10.00
191.84
10ND
Basin 2 Opening
1884
18" One Piece Catch
Black
1
9.50
204.62
10ND
Basin 4 Opening
Requires either #1206, #1242, #1243, #1245, #1266, #1888, #1889.
Universal outlets. (See page 24.)
Includes 2 or 4 #1890 Reducer Ring.
NDS #1882, #1884,
18" x 18" One-Piece
Tapered Catch Basin.
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
1800
18" x 18" Expandable
Black
1
16.00
149.21
10ND
Catch Basin 2 opening*
1804
18" x 18" Expandable
Black
1
16.00
160.00
10ND
Catch Basin 4 opening*
Assembly Required. #1800 includes: 2 #1822, 2 #1820, 1 #1828.
#1804 includes: 4 #1822, 1 #1828. Use #1800 and #1804 with #1206,
#1243, #1245, #1266 or #1888 Universal outlets. (See page 24.)
Includes 2 or 4 #1890 Reducer Ring.
(Note: Use Roof Tar or Silicone to seal joints.)
NDS #1800, #1804,
18" x 18" Modular Catch
Basin with Locking Tabs.
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
1816
8" Catch Basin Riser
Black
1
6.00
79.13
10ND
Riser package includes 4 sides. Use with #1800, #1804, #1882, or #1884.
NDS #1816, 6" Riser for
18" x 18" Catch Basin.
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
1840
Frame to adapt 18" x 18"
Black
4
2.00
42.61
10ND
grate to concrete catch basin
Use with 18" x 18" Grates on pages 20 and 21.
NDS #1840,
18" x 18" Frame.
(See pg. 47)
1
13
/
16
"
8
1
/
8
"
18
1
/
8
"
For customer service, please send your fax to: 1-800-726-1998 or call 1-800-726-1994.
22
18" CATCH BASIN SERIES
Note: All dimensions are nominal. All weights are for shipping purposes only. List prices are in U.S. Dollars.
17
7
/
8
"
3
5
/
8
"
18
1
/
8
"
19
1
/
4
"
18" COMPONENT PARTS
1
1
/
8
"
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
1830
18" x 18" Low Profile Adapter
Black
4
4.75
65.80
10ND
Includes NDS #1890 Reducer Ring. Requires either a NDS #1243,
#1245, #1266, or #1888 Universal Outlet. (See page 24.)
Fits Corrugated Pipe and Sewer and Drain Pipe.
NDS #1830, 18" x 18"
Low Profile Adapter with
Bayonet Bottom Outlet.
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
1850
18" x 18" Coupling
Black
1
6.00
138.44
10ND
Use with #1800, #1804 or Component Parts #1822, #1828.
Couples 18" x 18" Catch Basins together in 18" linear increments.
NDS #1850, 18" x 18"
Coupling with adjacent
Grate Support and
Locking Tabs.
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
1820
Basin Side - No Opening
Black
4
4.00
32.35
10ND
NDS #1820, 18" x 18"
Catch Basin Side,
No Opening.
19
1
/
4
"
18
1
/
8
"
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
1821
Basin Side - 8" Opening
Black
4
4.00
32.35
10ND
Reducer Ring not Included.
Requires #1888 Universal Outlet to fit 8" Corrugated Pipe or Sewer and Drain Pine
or #1266 Universal Outlets. (See page 24.)
#1889 Universal Outlet does not fit this #1821 Basin Side.
NDS #1821, 18" x 18"
Catch Basin Side,
8" Opening.
19
1
/
4
"
18
1
/
8
"
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
1822
Basin Side - 6" or 8" Opening
Black
4
3.75
37.76
10ND
Opening using Universal Outlet. Includes #1890 Reducer Ring.
Use with #1206, #1242, #1243, #1245, #1266
or #1888 Universal Outlets. (See page 24.)
NDS #1822, 18" x 18"
Catch Basin Side,
6" or 8" Opening.
19
1
/
4
"
18
1
/
8
"
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
1828
Basin Bottom
Black
4
2.50
19.79
10ND NDS #1828, 18" x 18"
Catch Basin Bottom.
1
1
/
8
"
15
1
/
2
"
6
1
/
4
"
6
1
/
4
"
9
1
/
2
"
1"
6
1
/
4
"
6
1
/
4
"
9
1
/
2
"
1"
23
For customer service, please send your fax to: 1-800-726-1998 or call 1-800-726-1994.
Note: All dimensions are nominal. All weights are for shipping purposes only. List prices are in U.S. Dollars.
24" CATCH BASIN SERIES
23
7
/
8
"
(See pg. 47)
2"
7
/
8
" Grate Opening
(See pg. 47)
24
3
/
4
"
8"
24"
24
3
/
4
"
(See pg. 47)
23
3
/
4
"
1" Grate Opening
2"
23
7
/
8
"
2"
1
1
/
4
" Grate Opening
1
5
/
8
"
2"
4
3
/
8
"
14
1
/
2
"
2"
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
2411
24" x 24" Square Grate
Black
1
19.75
318.44
10ND
2412
24" x 24" Square Grate
Green
1
19.75
318.44
10ND
Use with 24" x 24" Catch Basin Series.
See page 47 for installation details.
NDS #2411, #2412, 24"
Square Structural Foam
Polyolefin Grate with UV
inhibitor. Open surface
area 231.69 square inches.
303.51 GPM.
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
2413
24" x 24" Square Cast Iron Grate
Black
1
150.00 595.84
10ND
Use with 24" x 24" Catch Basin Series.
See page 47 for installation details.
NDS #2413, 24" Square
Heavy Duty Cast Iron
Grate. Open surface area
187.00 square inches.
244.97 GPM.
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
2415
24" x 24" Square Galvanized
Galvanized
1
67.00
712.12
10ND
Steel Grate
Steel
Use with 24" x 24" Catch Basin Series.
See page 47 for installation details.
NDS #2415, 24" Square
Heavy Duty Galvanized
Steel Bar Grate. Open
surface area 332.06
square inches.
435.00 GPM.
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
2400
24" x 24" Catch Basin, 2 Openings
Black
1
18.00
377.27
10ND
2404
24" x 24" Catch Basin, 4 Openings
Black
1
15.00
402.84
10ND
Requires 2 or 4 #2410 Universal Outlet. (See page 24.)
NDS #2400, #2404,
24" x 24" One-Piece
Tapered Catch Basin.
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
2418
24" x 24" Catch Basin Extension
Black
1
14.60
222.52
10ND
(No Bottom)
Use with 24" x 24" Catch Basin Series.
NDS #2418, 8" Extension
for 24" x 24" Catch Basin
For customer service, please send your fax to: 1-800-726-1998 or call 1-800-726-1994.
24
CATCH BASIN UNIVERSAL OUTLETS
Note: All dimensions are nominal. All weights are for shipping purposes only. List prices are in U.S. Dollars.
DS#1266 AI.eps
N
D
S
#
1
2
4
5
A
I.
e
p
s
N
DS
#18
89
AI.e
ps
NDS#1243 AI.eps
2
1
/
4
"
2
1
/
4
"
3
3
/
4
"
2
15
/
16
"
3"
2"
3"
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
1243
3" & 4" Universal Locking Outlet*
Black
20
0.70
4.51
10ND
Fits 3" & 4" Corrugated pipe, 3" & 4" Sewer and Drain Pipe, 4" SCH. 40 Pipe and 3" & 4" Triple
Wall Pipe. Use with 9", 12", 18" and 24" Catch Basin Series and #930, #1230, #1830 and #2410
Adapters. Use with 24" Catch Basin also requires #2410 adapter.
*New Locking Outlet snaps on to most 3" and 4" corrugated pipe.
NDS #1243, or #1244,
3" & 4" Patented Universal
Locking Outlet. Patent
#D402,013.
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
1245
3" & 4" Offset Universal Outlet
Black
20
0.55
4.83
10ND
Fits 3" & 4" Corrugated pipe, 3" & 4" Sewer and Drain Pipe, 4" SCH. 40 Pipe, 4" Triple Wall Pipe.
Allows for adjusting inlet height. Use with 9", 12", 18" and 24" Catch Basin Series. Use with 24"
Catch Basin also requires #2410 adapter.
NDS #1245, 3" & 4" Offset
Universal Outlet.
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
1242
3" & 4" Universal Outlet
Black
20
0.74
7.12
10ND
W/ 4" Spigot
Fits 3" & 4" Corrugated pipe, 3" & 4" Sewer and Drain Pipe, 4" SCH. 40 Pipe, 4" Triple Wall Pipe.
Allows for adjusting inlet height. Use with 9", 12", 18" and 24" Catch Basin Series. Use with 24"
Catch Basin also requires #2410 adapter.
NDS #1242, 3" & 4"
Universal Outlet.
NDS #1241, 3" & 4"
Patented Universal adapter.
#D402,013
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
1266
6" Universal Locking Outlet*
Black
20
0.75
5.40
10ND
Fits 6" Sewer and Drain Pipe, 6" Corrugated Pipe. Use with 9", 12", 18" and 24" Catch Basin
Series and #930, #1230, and #1830 Low Profile Adapters. Use with 24" Catch Basin also requires
#2410 adapter. *New, improved Locking Outlet snaps on to most 6" corrugated pipe.
NDS #1266, 6" Universal
Locking Outlet.
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
1888
8" Universal Outlet
Black
8
1.25
10.79
10ND
Fits 8" Sewer and Drain Pipe, 8" Corrugated Pipe. Use with 18" and 24" Catch Basin Series.
Use with 24" Catch Basin also requires #2410 adapter.
NDS #1888, 8" Universal
Outlet.
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
1889
8" Offset Universal Adapter
Black
10
0.80
10.79
10ND
Fits 8" Sewer and Drain Pipe, 8" Corrugated Pipe. Use with
9", 12" and most 18" Catch Basin Series (except 1800 and 1804).
1890
Universal Outlet Reducer Ring
Black
8
0.50
6.29
10ND
Required on #1821 basin side when using 3", 4", or 6" pipe. Required on #1821 basin side when
connecting to #1206, #1243, #1245, #1266 or #1889 Universal Outlets.
NDS #1889, 8" Offset
Universal Adapter
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
2410
10" & 12" Universal Adapter
Black
2
5.50
38.31
10ND
· Includes #1890 (comes pre-inserted).
· Fits 10" and 12" Sewer and Drain Pipe; 10" and 12" dual wall Corrugated Pipe;
12" single wall Corrugated Pipe (does not fit 10" single wall Corrugated Pipe).
· Reduces opening to fit most 3" to 8" adapters above (all except #1889) for use with
3", 4", 6" and 8" Sewer and Drain Pipe; 3", 4", 6" and 8" Corrugated Pipe; and
4" SCH. 40 Pipe (select corresponding adapter above).
· Use with 24" Catch Basin Series.
NDS #2410, 10" Universal
Adapter.
4
1
/
2
"
Pkg.
Wt. Ea. List Price Product
Part No.
Description
Color
Qty.
(lbs.)
(EA)
Class Specifications
1241
3" & 4" Universal Adapter
20
0.70
4.51
10ND
W/ 4" Spigot
Fits 3" & 4" Corrugated pipe, 3" & 4" Sewer and Drain Pipe, 4" SCH. 40 Pipe, 3" & 4" Triple Wall
Pipe. Use with 3" or 4" sewer and drain fittings.
25
For customer service, please send your fax to: 1-800-726-1998 or call 1-800-726-1994.
Note: All dimensions are nominal. All weights are for shipping purposes only. List prices are in U.S. Dollars.
CATCH BASIN UNIVERSAL OUTLETS
DURACASTTM IN-LINE GRATES
1" Grate Opening
3
/
4
" Grate Opening
1" Grate Opening
1
7
/
8
"
1
/
4
"
8"
2
5
/
8
"
10"
12
1
/
2
"
2