Trumbull
Mud Valves are designed primarily
for use in settling tanks of waste water treatment
plants. They are for low pressure applications only;
their intended use is to drain tanks for maintenance or
cleaning.
Mud valves are furnished with a 2" square
operating nut; however, they can be supplied with
optional extension stem or handwheel.
This valve series uses brass seats in the body
and gate. The cast iron body assembly features man-
ganese bronze stems and guides for use in submerged installations; the fasteners are made
from stainless steel.
Note: The flange drilling is according to ANSI
125# STD. on all sizes; however, one hole under each
leg of the yoke is not available for fastening to the
mating flange.
Bolts and nuts for mounting to floor pipe are not
furnished unless ordered separately.
See separate literature on Trumbull Floor
Boxes, Extension Stems and Stem Guides.
 
|
Typical installation of a Mud Valve in a system.
Size |
Non-Rising Stem |
Weight |
Rising Stem |
Weight |
4"
6"
8" |
367-1415
367-1416
367-1418
|
35#
55#
95# |
367-1420
367-1423
367-1425 |
35#
50#
85# |
|
